123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127 |
- /**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio_ex.c
- * @author MCD Application Team
- * @brief GPIO Extension HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the General Purpose Input/Output (GPIO) extension peripheral.
- * + Extended features functions
- *
- @verbatim
- ==============================================================================
- ##### GPIO Peripheral extension features #####
- ==============================================================================
- [..] GPIO module on STM32F1 family, manage also the AFIO register:
- (+) Possibility to use the EVENTOUT Cortex feature
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to use EVENTOUT Cortex feature
- (#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
- (#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
- (#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
- /* Includes ------------------------------------------------------------------*/
- #include "stm32f1xx_hal.h"
- /** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
- /** @defgroup GPIOEx GPIOEx
- * @brief GPIO HAL module driver
- * @{
- */
- #ifdef HAL_GPIO_MODULE_ENABLED
- /** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions
- * @{
- */
- /** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
- *
- @verbatim
- ==============================================================================
- ##### Extended features functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
- (+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
- (+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
- @endverbatim
- * @{
- */
- /**
- * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected.
- * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal.
- * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT.
- * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal.
- * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN.
- * @retval None
- */
- void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource)
- {
- /* Verify the parameters */
- assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource));
- assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource));
- /* Apply the new configuration */
- MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT) | (AFIO_EVCR_PIN), (GPIO_PortSource) | (GPIO_PinSource));
- }
- /**
- * @brief Enables the Event Output.
- * @retval None
- */
- void HAL_GPIOEx_EnableEventout(void)
- {
- SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
- }
- /**
- * @brief Disables the Event Output.
- * @retval None
- */
- void HAL_GPIOEx_DisableEventout(void)
- {
- CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
- }
- /**
- * @}
- */
- /**
- * @}
- */
- #endif /* HAL_GPIO_MODULE_ENABLED */
- /**
- * @}
- */
- /**
- * @}
- */
- /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|