123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275 |
- /**
- ******************************************************************************
- * @file stm32f1xx.h
- * @author MCD Application Team
- * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File.
- *
- * The file is the unique include file that the application programmer
- * is using in the C source code, usually in main.c. This file contains:
- * - Configuration section that allows to select:
- * - The STM32F1xx device used in the target application
- * - To use or not the peripheral’s drivers in application code(i.e.
- * code will be based on direct access to peripheral’s registers
- * rather than drivers API), this option is controlled by
- * "#define USE_HAL_DRIVER"
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
- /** @addtogroup CMSIS
- * @{
- */
- /** @addtogroup stm32f1xx
- * @{
- */
-
- #ifndef __STM32F1XX_H
- #define __STM32F1XX_H
- #ifdef __cplusplus
- extern "C" {
- #endif /* __cplusplus */
-
- /** @addtogroup Library_configuration_section
- * @{
- */
- /**
- * @brief STM32 Family
- */
- #if !defined (STM32F1)
- #define STM32F1
- #endif /* STM32F1 */
- /* Uncomment the line below according to the target STM32L device used in your
- application
- */
- #if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
- !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
- !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
- /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
- /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
- /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
- /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
- /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
- /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
- /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
- /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
- /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
- /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
- /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
- /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
- /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
- /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
- #endif
- /* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
-
- #if !defined (USE_HAL_DRIVER)
- /**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
- /*#define USE_HAL_DRIVER */
- #endif /* USE_HAL_DRIVER */
- /**
- * @brief CMSIS Device version number V4.3.3
- */
- #define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */
- #define __STM32F1_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
- #define __STM32F1_CMSIS_VERSION_SUB2 (0x03) /*!< [15:8] sub2 version */
- #define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
- #define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
- |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
- |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
- |(__STM32F1_CMSIS_VERSION_RC))
- /**
- * @}
- */
- /** @addtogroup Device_Included
- * @{
- */
- #if defined(STM32F100xB)
- #include "stm32f100xb.h"
- #elif defined(STM32F100xE)
- #include "stm32f100xe.h"
- #elif defined(STM32F101x6)
- #include "stm32f101x6.h"
- #elif defined(STM32F101xB)
- #include "stm32f101xb.h"
- #elif defined(STM32F101xE)
- #include "stm32f101xe.h"
- #elif defined(STM32F101xG)
- #include "stm32f101xg.h"
- #elif defined(STM32F102x6)
- #include "stm32f102x6.h"
- #elif defined(STM32F102xB)
- #include "stm32f102xb.h"
- #elif defined(STM32F103x6)
- #include "stm32f103x6.h"
- #elif defined(STM32F103xB)
- #include "stm32f103xb.h"
- #elif defined(STM32F103xE)
- #include "stm32f103xe.h"
- #elif defined(STM32F103xG)
- #include "stm32f103xg.h"
- #elif defined(STM32F105xC)
- #include "stm32f105xc.h"
- #elif defined(STM32F107xC)
- #include "stm32f107xc.h"
- #else
- #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
- #endif
- /**
- * @}
- */
- /** @addtogroup Exported_types
- * @{
- */
- typedef enum
- {
- RESET = 0,
- SET = !RESET
- } FlagStatus, ITStatus;
- typedef enum
- {
- DISABLE = 0,
- ENABLE = !DISABLE
- } FunctionalState;
- #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
- typedef enum
- {
- SUCCESS = 0U,
- ERROR = !SUCCESS
- } ErrorStatus;
- /**
- * @}
- */
- /** @addtogroup Exported_macros
- * @{
- */
- #define SET_BIT(REG, BIT) ((REG) |= (BIT))
- #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
- #define READ_BIT(REG, BIT) ((REG) & (BIT))
- #define CLEAR_REG(REG) ((REG) = (0x0))
- #define WRITE_REG(REG, VAL) ((REG) = (VAL))
- #define READ_REG(REG) ((REG))
- #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
- #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
- /* Use of CMSIS compiler intrinsics for register exclusive access */
- /* Atomic 32-bit register access macro to set one or several bits */
- #define ATOMIC_SET_BIT(REG, BIT) \
- do { \
- uint32_t val; \
- do { \
- val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \
- } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
- } while(0)
- /* Atomic 32-bit register access macro to clear one or several bits */
- #define ATOMIC_CLEAR_BIT(REG, BIT) \
- do { \
- uint32_t val; \
- do { \
- val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \
- } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
- } while(0)
- /* Atomic 32-bit register access macro to clear and set one or several bits */
- #define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
- do { \
- uint32_t val; \
- do { \
- val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
- } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
- } while(0)
- /* Atomic 16-bit register access macro to set one or several bits */
- #define ATOMIC_SETH_BIT(REG, BIT) \
- do { \
- uint16_t val; \
- do { \
- val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \
- } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
- } while(0)
- /* Atomic 16-bit register access macro to clear one or several bits */
- #define ATOMIC_CLEARH_BIT(REG, BIT) \
- do { \
- uint16_t val; \
- do { \
- val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \
- } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
- } while(0)
- /* Atomic 16-bit register access macro to clear and set one or several bits */
- #define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \
- do { \
- uint16_t val; \
- do { \
- val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
- } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
- } while(0)
- /**
- * @}
- */
- #if defined (USE_HAL_DRIVER)
- #include "stm32f1xx_hal.h"
- #endif /* USE_HAL_DRIVER */
- #ifdef __cplusplus
- }
- #endif /* __cplusplus */
- #endif /* __STM32F1xx_H */
- /**
- * @}
- */
- /**
- * @}
- */
-
- /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|