/* * This file is part of the CmBacktrace Library. * * Copyright (c) 2020, Armink, * Chenxuan, * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * 'Software'), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * NOTE: DO NOT include this file on the header file. * Encoding: GB18030 * Created on: 2020-09-06 */ [PRINT_MAIN_STACK_CFG_ERROR] = "错误：无法获取主栈信息，请检查主栈的相关配置", [PRINT_FIRMWARE_INFO] = "固件名称：%s，硬件版本号：%s，软件版本号：%s", [PRINT_ASSERT_ON_THREAD] = "在线程(%s)中发生断言", [PRINT_ASSERT_ON_HANDLER] = "在中断或裸机环境下发生断言", [PRINT_THREAD_STACK_INFO] = "=========== 线程堆栈信息 ===========", [PRINT_MAIN_STACK_INFO] = "============ 主堆栈信息 ============", [PRINT_THREAD_STACK_OVERFLOW] = "错误：线程栈(%08x)发生溢出", [PRINT_MAIN_STACK_OVERFLOW] = "错误：主栈(%08x)发生溢出", [PRINT_CALL_STACK_INFO] = "查看更多函数调用栈信息，请运行：addr2line -e %s%s -a -f %.*s", [PRINT_CALL_STACK_ERR] = "获取函数调用栈失败", [PRINT_FAULT_ON_THREAD] = "在线程(%s)中发生错误异常", [PRINT_FAULT_ON_HANDLER] = "在中断或裸机环境下发生错误异常", [PRINT_REGS_TITLE] = "========================= 寄存器信息 =========================", [PRINT_HFSR_VECTBL] = "发生硬错误，原因：取中断向量时出错", [PRINT_MFSR_IACCVIOL] = "发生存储器管理错误，原因：企图从不允许访问的区域取指令", [PRINT_MFSR_DACCVIOL] = "发生存储器管理错误，原因：企图从不允许访问的区域读、写数据", [PRINT_MFSR_MUNSTKERR] = "发生存储器管理错误，原因：出栈时企图访问不被允许的区域", [PRINT_MFSR_MSTKERR] = "发生存储器管理错误，原因：入栈时企图访问不被允许的区域", [PRINT_MFSR_MLSPERR] = "发生存储器管理错误，原因：惰性保存浮点状态时发生错误", [PRINT_BFSR_IBUSERR] = "发生总线错误，原因：指令总线错误", [PRINT_BFSR_PRECISERR] = "发生总线错误，原因：精确的数据总线错误", [PRINT_BFSR_IMPREISERR] = "发生总线错误，原因：不精确的数据总线错误", [PRINT_BFSR_UNSTKERR] = "发生总线错误，原因：出栈时发生错误", [PRINT_BFSR_STKERR] = "发生总线错误，原因：入栈时发生错误", [PRINT_BFSR_LSPERR] = "发生总线错误，原因：惰性保存浮点状态时发生错误", [PRINT_UFSR_UNDEFINSTR] = "发生用法错误，原因：企图执行未定义指令", [PRINT_UFSR_INVSTATE] = "发生用法错误，原因：试图切换到 ARM 状态", [PRINT_UFSR_INVPC] = "发生用法错误，原因：无效的异常返回码", [PRINT_UFSR_NOCP] = "发生用法错误，原因：企图执行协处理器指令", #if (CMB_CPU_PLATFORM_TYPE == CMB_CPU_ARM_CORTEX_M33) [PRINT_UFSR_STKOF] = "发生用法错误，原因：硬件检测到栈溢出", #endif [PRINT_UFSR_UNALIGNED] = "发生用法错误，原因：企图执行非对齐访问", [PRINT_UFSR_DIVBYZERO0] = "发生用法错误，原因：企图执行除 0 操作", [PRINT_DFSR_HALTED] = "发生调试错误，原因：NVIC 停机请求", [PRINT_DFSR_BKPT] = "发生调试错误，原因：执行 BKPT 指令", [PRINT_DFSR_DWTTRAP] = "发生调试错误，原因：数据监测点匹配", [PRINT_DFSR_VCATCH] = "发生调试错误，原因：发生向量捕获", [PRINT_DFSR_EXTERNAL] = "发生调试错误，原因：外部调试请求", [PRINT_MMAR] = "发生存储器管理错误的地址：%08x", [PRINT_BFAR] = "发生总线错误的地址：%08x",